Home > Products > Super-B Flat Deck Trailers > PFJ Series Super-B Flat Deck Trailer
PFJ Series Super-B Flat Deck Trailer
The PFJ series all steel train is designed to meet the needs of users that want a full 102” wide deck surface, typically for hauling lumber. The PFJ replaces the former PF1100 model. The side rails of this trailer are made of steel tubing, integrating stake pockets into this tubing. This design is intended to be flexible enough to accept loads up to the full width of the trailer and where tarping is required, to keep road contamination out of the load during transport. Load securement is accomplished through winches and receiving hooks mounted below the outer rails. The rear or pull trailer is typically fitted with forklift brackets to permit loading of this pull trailer onto the lead for an empty back haul.
| LENGTH | Customer spec: typically 28’ Lead & 32’ Pull or 32’ Lead & 28’ Pull |
| WIDTH | 102" |
| KING PIN | Customer spec: typical 36” on Lead, 24” on Pull |
| LANDING GEAR | Holland Mark V with 2-speed gear drive |
| FIFTH WHEEL | Holland FW3500 Series |
| FLANGES | Grade 130 high tensile chrome-moly steel, 3/8” or 1/2” x 5” depending on application |
| CROSSMEMBERS | Standard 4” steel at 16” spacing; optional 12” spacing available |
| OUTSIDE RAIL | 3” x 4” steel tubing at full 102” deck width with 1” x 2” tubing under ends of cross members |
| STAKE POCKETS | Integral, cut into side rail tubing, 24” spacing |
| FLOOR | 1 5/16" fir; optional hardwood or aluminum available |
| LOAD SECUREMENT | Various fixed winches, barrel or 3-bar style; J-hooks, and others, all tested to meet current Load Securement regulations |
| MUDFLAPS | Heavy duty, black rubber, anti-spray, anti-sail |
| BUMPER | Transport Canada and US DOT compliant rear impact bumper |
| FINISH | Fully grit blasted, pure zinc coating in landing gear and suspension areas, urethane primer, DuPont Imron 5000 top coat, color per customer spec |
| LIGHTING | SAE J560 7-pin plug at front, sealed lights, Lode-King sealed wiring harness |
| SUSPENSION | Hendrickson Intraax |
| AXLES | Hendrickson on Intraax |
| ABS | Meritor Wabco |
| OIL SEALS | Guardian HP |
| HUBS | 10 stud, hub piloted, cast or lighter weight options |
| DRUMS | Outboard, cast or lighter weight options |
| BRAKES | 16 1/2" x 7" quick change |
| BRAKE LININGS | Abex 931-162 |
| WHEELS | Standard white steell lightweight powder coat steel and various aluminum options available |
| TIRES | Tubeless radials. Wide range of Bridgestone and Michelin products available |
| Trailer Type | 110,000 LB MAXIMUM TOTAL UNIFORMLY DISTRIBUTED LOAD | |||||
|---|---|---|---|---|---|---|
| MAXIMUM CONCENTRATED LOADS IN | ||||||
| 5 FEET | 10 FEET | UNIFORMLY DISTRIBUTED | ||||
| LB | KG | LB | KG | LB | KG | |
| LEAD | 30,000 | 13,636 | 40,000 | 18,181 | 58,000 | 26,363 |
| PUP | 30,000 | 13,636 | 40,000 | 18,181 | 52,000 | 26,363 |
Options
- Extended service brake linings
- Toolbox – various sizes and mounts
- Coil package - stub cross members located between main beams and spaced between full width cross members
- Hardwood or aluminum flooring
- LED lighting package
- Flip-up forklift rings
- Axle chain slings
- Aluminum pull-out wide load lights
- Hubodometer
- Aluminum fill plate in bumper with Lode King logo
- Dunnage rack under-mount, side mount or dunnage box in rear bolster of Pull
- Spare tire carrier
- Tarp rope hooks n
- Bolt-on rear impact bumper for Pull units
- Tire inflation system
